Table of Contents
Advertisement
Physical Details
Front-mounted LEDs
WPS Button
Push the WPS button on the device and on your other wireless
device to perform WPS function that easily creates an encryption-
secured wireless connection automatically.
Power LED
On - Power on.
Off - No power.
WPS LED
Off - WPS feature is not in use.
On - If the LED is blinking for a while and then on, WPS is process-
ing successfully.
Blinking - If the LED is blinking for over 1 minute then off, the
WPS is not processing successfully.
WLAN LED
On - Idle.
Off - Error - No Wireless connection available.
Flashing - Data is being transmitted or received via the Wireless
access point. This includes "network traffic" as well as user data.
Connected
On - Internet connection is available.
LED
Off - No Internet connection available.
Flashing - Data is being transmitted or received.
WAN LED
On - Connection to the Broadband Modem attached to the WAN
(Internet) port is established.
Off - No connection to the Broadband Modem.
Flashing - Data is being transmitted or received via the WAN port.
For each port, there are 1 LED
LAN LEDs
•
Figure 2: Front Panel
10 (Orange)/100 (Green)
•
On - Corresponding LAN (hub) port is active.
•
Off - No active connection on the corresponding LAN (hub)
port.
•
Flashing - Data is being transmitted or received via the
corresponding LAN (hub) port.
SIGNAMAX LLC •
www.signamax.eu
6
Advertisement
Table of Contents
