Table of Contents
Advertisement
Wireless Screen
The Wireless Router's settings must match the other Wireless stations.
Note that the Wireless Router will automatically accept both 802.11b and 802.11g
connections, and no configuration is required for this feature.
To change the Wireless Router's default settings for the Wireless Access Point feature,
use the Wireless link on the main menu to reach the Wireless screen. An example
screen is shown below.
Data - Wireless Screen
Identification
Region
Station name
Figure 7: Wireless Screen
Select your region from the drop-down list. This field displays the
region of operation for which the wireless interface is intended. It
may not be legal to operate the router in a region other than the
region shown here. If your country or region is not listed, please
check with your local government agency for more information
on which channels you are allowed to use, and select a region
which allows those channels. (The channel list changes accord-
ing to the selected region.)
On your PC, some Wireless status screens may display this
name as the Access Point in use.
SIGNAMAX LLC •
www.signamax.eu
19
Advertisement
Table of Contents
