Table of Contents
Advertisement
WDS Setup
Wi-Fi Protected
Setup
Save
Cancel
Wireless Security Screen
This screen is accessed by clicking the "Configure" button on the Wireless screen.
There are 3 options for Wireless security:
•
Disabled - no data encryption is used.
•
WEP - data is encrypted using the WEP standard.
•
WPA/WPA2-PSK - data is encrypted using the WPA standard. This is a later
standard than WEP, and provides much better security than WEP.
Wireless Security - WEP
Data - WEP Screen
Authentication
Key Size
Passphrase
Click this button to open a sub-screen where you can modify the
"WDS" settings. See the following section for more details.
Click this button to open a sub-screen where you can modify the
"WPS" settings. See the following section for more details.
Save the data on screen.
The "Cancel" button will discard any data you have entered
since the last "Save" operation.
Figure 8: WEP Screen
Normally this can be left at the default value of "Auto". If that
fails, select the appropriate value - "Open System" or "Shared
Key." Check your wireless card's documentation to see what
method to use.
Select the WEP Encryption level:
•
64-bit (sometimes called 40-bit) encryption
•
128-bit encryption
Enter a word or group of printable characters in the Passphrase
box and click the "Generate " button to automatically configure
SIGNAMAX LLC •
www.signamax.eu
21
Advertisement
Table of Contents
