Connection
Status
Connection Log
Connection Log
Buttons
Connect
Disconnect
Clear Log
Refresh
address is allocated by your ISP (Internet Service Provider).
This indicates whether or not the connection is currently estab-
lished.
•
If the connection does not exist, the Connect button can be
used to establish a connection.
•
If the connection currently exists, the Disconnect button
can be used to break the connection.
•
Normally, it is not necessary to use the Connect and
Disconnect buttons unless the setting "Connect automati-
cally, as required" is disabled.
•
The Connection Log shows status messages relating to
the existing connection.
•
The "Clear Log" button will restart the Log, while the Re-
fresh button will update the messages shown on screen.
If not connected, establish a connection to your ISP.
If connected to your ISP, hang up the connection.
Delete all data currently in the Log. This will make it easier to
read new messages.
Update the data on screen.
SIGNAMAX LLC •
www.signamax.eu
47