Table of Contents
Advertisement
This screen lists a number of pre-defined Servers, and allows you to define your own
Servers. Details of the selected Server are shown in the "Properties" area.
Data - Virtual Servers Screen
Servers
Servers
Properties
Enable
PC (Server)
Protocol
Internal (LAN)
Ports
External
(WAN) Ports
Buttons
Delete
Defaults
Figure 43: Virtual Servers Screen
This lists a number of pre-defined Servers, plus any Servers
you have defined. Details of the selected Server are shown in
the "Properties" area.
Use this to Enable or Disable support for this Server, as
required.
Select the PC for this Server. The PC must be running the
appropriate Server software.
Select the protocol (TCP or UDP) used by the Server.
Enter the range of port numbers which the Server software is
configured to use.
Traffic from the Internet using this range of port numbers will
be sent to the Server. This is normally the same as the
Internal Port Numbers. If it is different, this device will perform
a "mapping" or "translation" function, allowing the server to
use a different port range to the clients.
Delete the current Virtual Server entry. Note that the pre-
defined Servers can not be deleted. Only Servers you have
defined yourself can be deleted.
This will delete any Servers you have defined, and set the
pre-defined Servers to use their default port numbers.
SIGNAMAX LLC •
www.signamax.eu
69
Advertisement
Table of Contents
