Table of Contents
Advertisement
WDS Setup
Wireless Distribution System (WDS) allows you to make a completely wireless net-
work by using multiple access points without connecting them with a wire LAN. This
feature is normally used in large, open areas or in residential circumstances.
In order to make the WDS working successfully, the access point must use the same
channel, SSID, as well as the wireless encryption method.
Data - WDS Setup Screen
WDS
Enable WDS
Allow device
can associ-
ate...
Forbid wireless
client ...
Figure 10: WDS Screen
Enable the feature as required.
Check this checkbox if you only allow the following access
points to be connected to the wireless router. Enter the MAC
address(es) of the AP(s) into the fields
Enable this to let APs communicate only with each other and
don't allow wireless clients or Stations (STA) to access them.
SIGNAMAX LLC •
www.signamax.eu
23
Advertisement
Table of Contents
