Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for SignaMax TW263R4
Summary of Contents for SignaMax TW263R4
- Page 3 Wireless ADSL2+ Router...
-
Page 4: System Requirements
TW263R4 Wireless ADSL2+ Router System Requirements Pentium 200MHZ processor or above Windows 98SE, Windows Me, Windows 2000, Windows XP and Windows Vista. 64MB of RAM or above. 25MB free disk space Package Contents For Annex-B WLAN ADSL2+ Router WLAN ADSL2+ Router CD-ROM (Software &... -
Page 5: Installation And Setup
Wireless ADSL2+ Router Installation & Setup Follow each STEP carefully and only go to the next step once you have complete the previous STEP. STEP 1 Connection of WLAN ADSL2+ Router ISDN telephone line If you have an connect the modem router as shown below: 1. - Page 6 TW263R4 Wireless ADSL2+ Router PSTN telephone line (normal analog line If you have a connect the router as shown below: 1. Connect the supplied RJ45 Ethernet cable from your PC's Ethernet port to any of the 4 WLAN ADSL2+ Router's LAN Ports.
-
Page 7: Led Meaning
Wireless ADSL2+ Router LED Meaning Your WLAN ADSL2+ Router has indicator lights on the front side. Please see below for an explanation of the function of each indicator light. ● PWR : Power indicator ● @ACT : ADSL Active indicator ●... -
Page 8: Configuration Procedures
TW263R4 Wireless ADSL2+ Router STEP 2 Configuration Procedures Before starting the WLAN ADSL2+ Router configuration, please kindly configure the PC computer as below, to have automatic IP address / DNS Server. For Windows 98SE/ME/2000/XP Click on "Start” -> “Control Panel” (in Classic View).In the Control Panel, double click on "Network Connections"... - Page 9 Wireless ADSL2+ Router Double click on "Internet Protocol (TCP/IP)". Check "Obtain an IP address automatically” and “Obtain DNS server address automatically” then click on "OK" to continue. Click "Show icon in notification area when connected" (see screen image in 3. above) then Click on "OK" to complete the setup procedures.
- Page 10 TW263R4 Wireless ADSL2+ Router For Windows Vista-32/64 1. Click on "Start” -> “Control Panel” (in Classic View) -> “Network and Sharing Center”. In the Manage network connections, double click on "Manage network connections " to continue. 2. Single right click on “Local Area connection", then click "Properties".
- Page 11 Wireless ADSL2+ Router Double click on "Internet Protocol Version 4(TCP/IPv4)" Check " Obtain an IP address automatically " and “Obtain DNS server address automatically” then click on " OK " to continue. Click "Show icon in notification area when connected" (see screen image in 4.
- Page 12 TW263R4 Wireless ADSL2+ Router STEP 3 WLAN ADSL2+ Router Configuration Please insert the supplied CD into your CD-ROM drive. The CD should auto-start, displaying the window shown in 3. below. If your CD does not start automatically go to Windows Explorer, Select your CD drive and double click “setup”...
- Page 13 Wireless ADSL2+ Router When the “information” screen pop-up, please click “OK” button, to configure the WLAN setting, or click “EXIT” button to exit program. Please enter the SSID and wireless channel if you want to change (the default setting SSID=RT2561_6, Channel=6). Choose the Authentication type if necessary, as Disable / WEP-64bits / WEP-128bits / WPA-PSK and WPA2-PSK.
- Page 14 TW263R4 Wireless ADSL2+ Router Please click on “Save configuration” button. When the procedure is completed, the program will exit.
-
Page 15: Connect Wirelessly
Wireless ADSL2+ Router STEP 4 Connect Wirelessly For easy installation it is saved to keep the settings. You can later change the wireless settings via the wireless configuration menu. (see user manual on the CD – Chapter 8 and other) 1. - Page 16 TW263R4 Wireless ADSL2+ Router 3. Enter the network key that belongs to your authentication type and key. You can later change this network key via the wireless configuration menu. (see user manual on the CD – Chapter 8 and other) 4.