Table of Contents
Advertisement
Finish Port
ICMP Type
Access Control Log
To check the operation of the Access Control feature, an Access Control Log is pro-
vided. Click the View Log button on the Access Control screen to view this log.
This log shows attempted Internet accesses which have been blocked by the Access
Control function.
Data shown in this log is as follows:
Date/Time
Name
Source IP address
MAC address
Destination
"Finish Port" field.
If the "Type" (above) is TCP, UDP, or TCP/UDP, this field can
be used to enter the end of range of port numbers. This can be
left blank if not required.
If the "Type" (above) is ICMP, enter the ICMP type here.
Otherwise, this field should be left blank.
Date and Time of the attempted access.
If known, the name of the PC whose access was blocked.
The IP Address of the PC or device whose access request
was blocked
The hardware or physical address of the PC or device whose
access request was blocked
The destination URL or IP address
SIGNAMAX LLC •
www.signamax.eu
57
Advertisement
Table of Contents
