Notice To Users Of The New Zealand Telephone Network; Using This Product In Switzerland; Utilisation De Ce Produit En Suisse; Verwendung Dieses Produkts In Der Schweiz - Konica Minolta Bizhub 3320 User Manual

Notice to users of the New Zealand telephone network

The following are special conditions for the Facsimile User Instructions. The grant of a telepermit for any
item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum
conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does
it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all
respects with another item of telepermitted equipment of a different make or model, nor does it imply that
any product is compatible with all of Telecom's network services.
This equipment shall not be set up to make automatic calls to the Telecom's 111 Emergency Service.
This equipment may not provide for the effective hand-over of a call to another device connected to the
same line.
This equipment should not be used under any circumstances that may constitute a nuisance to other
Telecom customers.
Some parameters required for compliance with Telecom's telepermit requirements are dependent on the
equipment associated with this device. The associated equipment shall be set to operate within the
following limits for compliance to Telecom's specifications:
• There shall be no more than 10 call attempts to the same number within any 30 minute period for any
single manual call initiation, and
• The equipment shall go on-hook for a period of not less than 30 seconds between the end of one
attempt and the beginning of the next call attempt.
•
The equipment shall be set to ensure that automatic calls to different numbers are spaced such that
there is not less than 5 seconds between the end of one call attempt and the beginning of another.

Using this product in Switzerland

This product requires a Swiss billing tone filter (part number 80D1877) to be installed on any line which
receives metering pulses in Switzerland. The filter must be used, as metering pulses are present on all
analog telephone lines in Switzerland.

Utilisation de ce produit en Suisse

Cet appareil nécessite l'utilisation d'un filtre de tonalité de facturation suisse (nº de référence : 80D1877)
devant être installé sur toute ligne recevant des impulsions de comptage en Suisse. Ce filtre doit être
utilisé pour toute installation car ces impulsions existent sur toutes les lignes téléphoniques suisses.

Verwendung dieses Produkts in der Schweiz

Für dieses Produkt muss ein schweizerischer Billing Tone Filter zur Zählzeichenübertragung
(Teilenummer 80D1877) für jede Leitung installiert werden, über die in der Schweiz Zeitsteuertakte
übertragen werden. Die Verwendung des Filters ist obligatorisch, da in allen analogen Telefonleitungen in
der Schweiz Zeitsteuertakte vorhanden sind.
User's Guide
- 295 -