Konica Minolta Bizhub 3320 User Manual page 198

Notes:
• When Jam Assist is set to On, the printer automatically flushes blank pages or pages with partial
prints to the standard bin after a jammed page has been cleared. Check your printed output stack for
discarded pages.
• When Jam Recovery is set to On or Auto, the printer reprints jammed pages. However, the Auto
setting does not guarantee that the page will reprint.
Jam access
area
1 Automatic
document
feeder (ADF)
2 Standard bin
3 Front door
4 Multipurpose
feeder
5 Tray 1
6 Tray [x]
7 Rear door
User's Guide
Printer control panel message
[x]-page jam, open automatic feeder top
cover. [28y.xx]
[x]-page jam, clear standard bin. [20y.xx]
[x]-page jam, open front door. [20y.xx]
[x]-page jam, clear manual
feeder. [25y.xx]
[x]-page jam, remove tray 1 to clear
duplex. [23y.xx]
[x]-page jam, remove tray [x]. [24y.xx]
[x]-page jam, open rear door. [20y.xx]
- 198 -
What to do
Remove all paper from the ADF tray,
and then remove the jammed paper.
Remove the jammed paper.
Open the front door, then remove the
toner cartridge and imaging unit, and
then the jammed paper.
Remove all paper from the multipurpose
feeder, and then remove the jammed
paper.
Pull out tray 1 completely, then push the
front duplex flap down, and then remove
the jammed paper.
Note: You may need to open the rear
door to clear some 23y.xx paper jams.
Pull out the indicated tray, and then
remove the jammed paper.
Open the rear door, and then remove
the jammed paper.