Konica Minolta Bizhub 3320 User Manual page 134

Use
Alarms
Alarm Control
Cartridge Alarm
Timeouts
Sleep Mode
Disabled
1–120 min
User's Guide
To
Set an alarm to sound when the printer requires user
intervention. When activated, Alarm Control lets you set the
number of times that the alarm sounds, while Cartridge Alarm
lets you stop printing when a cartridge-low condition occurs.
For each alarm type, select from the following options:
Off
Single
Continuous
Notes:
- Single is the factory default setting for Alarm Control.
This sounds three quick beeps.
- Off is the factory default setting for Cartridge Alarm.
This means no alarm will sound.
- Continuous repeats three beeps every 10 seconds.
Set the amount of time the printer waits after a job is printed
before it goes into a reduced power state.
Notes:
• "30 min" is the factory default setting.
• Disabled appears only when Energy Conserve is set to
Off.
• Lower settings conserve more energy, but may require
longer warm-up times.
• Select a high setting if the printer is in constant use. Under
most circumstances, this keeps the printer ready to print
with minimum warm-up time.
- 134 -