Konica Minolta Bizhub 3320 User Manual page 35

1. From the printer control panel, navigate to:
>Settings >
>Wireless > >Wireless Connection Setup >
2. Select a wireless connection setup.
Use
Search for networks
Enter a network name
Wi-Fi Protected Setup
3. Press , and then follow the instructions on the printer display.
Connecting the printer to a wireless network using Wi-Fi Protected Setup (WPS)
Before you begin, make sure that:
• The access point (wireless router) is WPS certified.
• A wireless network adapter is installed in the printer and is working properly. For more information,
see the instruction sheet that came with the wireless network adapter.
Using the Push Button Configuration (PBC) method
1. From the printer control panel, navigate to:
>Settings >
>Wireless > >Wi-Fi Protected Setup >
2. Follow the instructions on the printer display.
Using the Personal Identification Number (PIN) method
1. From the printer control panel, navigate to:
>Settings >
Setup > >Start PIN Method >
2. Copy the eight-digit WPS PIN.
User's Guide
>Network/Ports >
To
Show available wireless connections.
Note: This menu item shows all broadcast secured or unsecured SSIDs.
Manually type the SSID.
Note: Make sure to type the correct SSID.
Connect the printer to a wireless network using Wi-Fi Protected Setup.
>Network/Ports >
>Network/Ports >
>Network [x] > >Network [x] Setup >
>Network [x] > >Network [x] Setup >
>Start Push Button Method >
>Network [x] >Wireless >
- 35 -
>Wi-Fi Protected