E83: Error in reading the programme selector code
E83
Code for the position of the selector not included in configuration data or configuration error
Tests to be performed:
Switch the appliance on and
turn the programme selector
to every position. Wait 10
seconds at each position
before passing to the next
one. Does alarm E83
reappear?
YES
Replace the circuit board
and restart the diagnostic
cycle to check for further
alarm conditions.
2007-10 SOI/DT-mdm FCPD-dp Quality-fz
NO
Restart the diagnostic
cycle to check for further
alarm conditions.
50/59
E83
599 70 32-47