Silvercrest DV-5300HD User Manual page 50

English
Before diving:
Only check the following points indoors:
•
Check the area around the interfaces (battery/SD card and HDMI/USB
socket); remove dirt, sand and other particles.
•
Ensure that the covers of the battery compartment (G) and the interfaces
(O) are not scratched or broken and that they are firmly closed.
•
Also check that the camera is not cracked or broken.
During diving:
•
Never expose the camcorder to ...
−
a water depth of more than 3 metres.
−
high water pressure.
−
water at a temperature outside the range of 0° to 40 °C.
−
any impact or shock; this could open the cover of the battery compart-
ment (G) and the interfaces (O).
•
Never immerse the camera in water for longer than 60 minutes.
After diving:
Clean the camera immediately after using it underwater. Proceed as follows:
1. Ensure that the covers of the battery compartment (G) and the interfaces
(O) are not scratched or broken and that they are firmly closed. Also check
that the camera is not cracked or broken.
2. Wash the camcorder under running tap water.
3. Immerse the camcorder in fresh water (not salt water) for two to three min-
utes to remove any salt deposits.
4. Remove the camcorder from the water and shake it several times.
5. Wipe the camera and lens carefully with a clean cloth. Ensure that the
cloth is lint-free and that it does not contain any salt deposits.
48
Silvercrest DV-5300HD