Silvercrest DV-5300HD User Manual page 28

English
Proceed as follows:
1. Connect the camcorder to the PC with the supplied USB/AV cable.
2. Switch the camcorder on by opening the LCD monitor.
The following message then appears on your PC screen after a short time:
"Found new hardware".
If the camcorder is not detected, remove and reinsert the USB connector.
You can also try using a different USB socket on your PC.
3. Place the "TotalMediaHDCam" CD in your CD/DVD drive.
The installation wizard normally starts automatically. If it does not start
automatically, proceed as follows:
−
Open the file browser (Explorer) (right-click on [Start] → "Explorer"
menu).
−
Click the icon of your CD or DVD drive in My Computer.
−
 S tart installation by double-clicking the "TotalMediaHDCam.exe" file.
The software is then automatically installed and started.
4. The language of the user interface is selected in the "Options" menu (at
the top right in the programme window) and the "Preferences" menu item
(top menu item).
Information on the software functions is given in the corresponding online
help which is also opened with the "Options" menu.
26
Silvercrest DV-5300HD