Basics
When using the Wireless LAN Interface (option) in Ad hoc Mode
Note
❒ You can set the Ad hoc Mode when you do not set SSID (Network Name)
from your computer. In this case, setting SSID from this machine is ineffec-
tual.
❒ The network administrator must check the environment and set the Com-
2
munication mode and Channel correctly. For details on settings, see "Us-
ing the IEEE 802.11b (Wireless LAN)" in the Network Printing Guide.
❒ You can set the Ad hoc mode from the control panel or using the Web
browser. For details on settings, see the Network Printing Guide.
A Make sure that [Network] is selected, and press [LAN Type].
B Press [IEEE 802.11b], and then press [OK].
C Press [IEEE 802.11b].
D Press [Communication Mode].
E Press [Ad hoc], and then press [OK].
F Press [Channel].
G Use the number keys to enter the channel to be used, and press [OK].
30