Ricoh Aficio 1224C Settings Manual page 40

Basics
Mode
Printer
2
*1
To use this function, you'll need ScanRouter V2 Lite (packaged with optional Print-
er/Scanner Controller or ScanRouter V2 Professional). In addition to the network
settings, you must set the "Delivery Server IP Address" and "Fax RX File Transmis-
sion" for file transfer.
*2
You will need to specify the settings for a network TWAIN scanner and network de-
livery scanner when using the scanner function.
*3
When you use this function, you need to have an optional 128MB or 256MB memory,
or ScanRouter V2 Lite which is bundled with the optional Printer/Scanner Control-
ler. If you need to have ScanRouter V2 Professional, see the Scanner Reference.
*4
Make necessary settings for your network environment. For details about settings,
see the Printer Reference.
*5
Configure the TCP/IP when you use pure IP of NetWare 5/5.1.
*6
You will need the IEEE 1394 Interface Board (option).
*7
You will need the IEEE 802.11b Interface Kit (option).
*8
Make the necessary settings when the communication mode is infrastructure mode
or 802.11b Ad hoc mode.
*9
Make necessary settings when the communication mode is in 802.11b Ad hoc mode
or Ad hoc mode.
Note
❒ For a network environment that uses TCP/IP, you can use SmartNetMonitor
to configure IP addresses for Admin and the web browser packaged with
Printer Controller or Printer/Scanner Controller. For details about Smart Net
Monitor, see the Network Printing Guide.
❒ For details on the setting values, see p.62 "Settings You Can Change with the
User Tools".
24
Network En- Network Settings
vironment
Wireless LAN IP Address, Subnet Mask, Gateway Ad-
*7
dress, Network Boot, Effective Proto-
col, Interface Select, Communication
Mode, Channel
*9 *8
, WEP, SSID
Reference
⇒ p.26 "When us-
ing TCP/IP", p.30
"When using the
Wireless LAN In-
terface (option) in
Ad hoc Mode",
p.31 "When using
the Wireless LAN
Interface (option)
in Infrastructure
Mode", p.29
"When using the
Wireless LAN In-
terface (option) in
802.11 Ad hoc
Mode"