Page 2
Perm Wall Installation The Perm Wall frame should be fastened to a wall. The frame is not designed for “flying” installations. 1. Assemble frame sections together by inserting plastic corner 3. Make sure that sides are at 90 degrees or right angle to brackets to tubes and securing the corners with #12 sheet bottom and fasten to wall in like manner.
Page 3
Cleaning Da-Mat®, High Contrast Da-Mat®, Pearlescent, Cinema Vision, Using a white clean cloth (100% cotton preferred) that is High Contrast Cinema Vision, High Contrast Cinema Perf, dampened with clear water, gently wipe the area in one direction. Audio Vision, High Contrast Audio Vision, Da-Tex® (Rear) and Do not use a circular motion.
Page 4
OF EQUIPMENT, OR FOR INCIDENTAL, DIRECT, OR CONSEQUENTIAL DAMAGES OF ANY NATURE. In the event that there is a defect in materials or workmanship of a Da-Lite product, you may contact our Sales Partners at PO Box 137, Warsaw, IN 46581-0137, (574) 267-8101, (800) 622-3737.
Need help?
Do you have a question about the Perm Wall Frame and is the answer not in the manual?
Questions and answers