Chapter 7 Award Bios Utility; Bios Setup - AXIOMTEK IMB200 User Manual

Intel pentiumd/pentium4/celeron d industrial atx motherboard
Hide thumbs Also See for IMB200:
Table of Contents

Advertisement

IMB200 LGA775 ATX MB User Manual

Chapter 7 Award BIOS Utility

Please pay more time and check all of detailed information for
BIOS settings when you want to used the
IMB200
7.1
BIOS Introduction
The Award BIOS (Basic Input/Output System) installed in your
computer system's ROM supports Intel Celeron processors in
a standard IBM-AT compatible I/O system. The BIOS provides
critical low-level support for standard devices such as disk
drives, serial and parallel ports. It also adds virus and
password protection as well as special support for detailed
fine-tuning of the chipset controlling the entire system.
7.2

BIOS Setup

The Award BIOS provides a Setup utility program for
specifying the system configurations and settings. The BIOS
ROM of the system stores the Setup utility. When you turn ON
the computer, the Award BIOS is immediately activated.
Pressing the <Del> key immediately allows you to enter the
Setup utility. If you are a little bit late pressing the <Del> key,
POST (Power on Self Test) will continue with its test routines,
thus preventing you from invoking the Setup. If you still wish to
enter Setup, restart the system by pressing the "Reset" button
or simultaneously pressing the <Ctrl>, <Alt> and <Delete>
keys. You can also restart by turning the system OFF and back
ON again. The following message will appear on the screen:
Press <DEL> to Enter Setup
In general, you press the arrow keys to highlight items,
<Enter> to select, the <PgUp> and <PgDn> keys to change
entries, <F1> for help and <Esc> to quit.
When you enter the Setup utility, the Main Menu screen will
appear on the screen. The Main Menu allows you to select
36
Award BIOS Utility

Advertisement

Table of Contents
loading

Table of Contents