Esd Precautions - AXIOMTEK IMB200 User Manual

ESD Precautions

Integrated circuits on computer boards are sensitive to static
electricity. To avoid damaging chips from electrostatic
discharge, observe the following precautions:
Do not remove boards or integrated circuits from their
anti-static packaging until you are ready to install them.
Before handling a board or integrated circuit, touch an
unpainted portion of the system unit chassis for a few
seconds. This helps to discharge any static electricity on
your body.
Wear a wrist-grounding strap, available from most
electronic component stores, when handling boards and
components.
Trademarks Acknowledgments
AXIOMTEK is a trademark of AXIOMTEK Co., Ltd.
IBM is a registered trademark of International Business
Machines Corporation.
MS-DOS, and Windows 2000 are trademarks of Microsoft
Corporation.
Award is a trademark of Award Software, Inc.
IBM, PC/AT, PS/2, VGA are trademarks of International
Business Machines Corporation.
Intel Pentium D, Pentium4, Celeron D is trademarks of Intel
Corporation.
Other brand names and trademarks are the properties and
registered brands of their respective owners.
iii