IMB200 LGA775 ATX MB User Manual
4.11 Audio Jack (Line-in/Line-Out/MIC)-CN3
4.12 ATX12V CPU Power Connector: CN14
This connector connected to an ATX12V power supply and
used for CPU Core Voltage.
Important Note: Make sure your ATX12V power supply can
provide 16A on the +12V lead and at least 1A
on the +5V standby lead (+5VSB). The
minimum recommended wattage is 250W or
300W for a fully configured system. The
system may become unstable and may
experience difficulty powering up if the power
supply is inadequate.
28
Hardware Description