Connecting Inputs; Low Level Inputs - Optimus Owner's Manual

12-2010.fm Page 10 Tuesday, July 13, 1999 2:10 PM

CONNECTING INPUTS

LOW LEVEL INPUTS

If your autosound system has low level phono output jacks, use this chart to find the
page number in this manual that has the appropriate instructions for connecting your
amplifier's low level phono input jacks to your autosound system.
If your autosound system does not have low level phono output jacks, follow the in-
formation in "High Level (Speaker Wire) Inputs" on Page 15 to connect your ampli-
fier.
Notes:
• For the best results, use shielded audio cables such as Cat. No. 42-2368 (not
supplied).
• If your autosound system has two speakers, you must select only one terminal
pair (either and
CH1
sources. For example, if you select
connect any wires to
10
Phono
Output Speakers
Jacks
4 4
4 2
2 4
2 2
or
and
CH2 CH3 CH4
CH1
and .
CH3 CH4
Go to Page
11
12
13
14
) to use when connecting input
and as the terminal pair, do not
CH2