12-2010.fm Page 21 Tuesday, July 13, 1999 2:10 PM
1. Connect one end of a speaker wire's marked conductor to the amplifier's
BRIDGED + CH1
2. Connect the other end of the wire to the left speaker's positive (+) terminal.
3. Connect one end of the speaker wire's unmarked conductor to the amplifier's
BRIDGED CH1 –
4. Connect the other end of the wire to the left speaker's negative (–) terminal.
5. Repeat Steps 1–4 to connect speaker wires between the amplifier's
or
CH2
BRIDGED CH4
6. Set
CH1/CH2 ST/BRG
Two Speakers (Bridged Connection)
(illustration - show connections made between speaker wires
and amplifier's BRIDGED CH +/- terminals)
If you are connecting two speakers and you are not connecting a subwoofer, you
can bridge (add) the power output of the amplifier's channels to produce the com-
bined power of both (front and rear) from the two speakers.
or
terminal.
BRIDGED + CH3
or
terminal.
BRIDGED – CH3
terminals and the right speaker's terminals.
and
CH3/CH4 ST/BRG
to
.
ST
BRIDGED
21