Table of Contents
Advertisement
XL-200 Bridgeable Amplifier
(120-2016)
LOW-LEVEL INPUTS
You can connect your autosound system's low-level line out jacks to the
amplifier's low-level line in jacks.
If your autosound system does not have low-level line out jacks, see "High
Level (Speaker Wire) Inputs" (below) to connect your amplifier.
Note:
For the best results, use shielded audio cables such Cat. No.
42-2368 (not supplied).
1.
Temporarily place the amplifier as close as possible to the selected
mounting location.
2.
If your autosound system has two line out jacks, connect the autosound
system to the amplifier with the right line out jack being connected to
the Low Input right jack, and the left line out jack being connected to
the Low Input left jack.
Note:
If your autosound system has four separate line out jacks, use the
autosound system's front left and right jacks to make this
connection.
HIGH-LEVEL (SPEAKER WIRE) INPUTS
If your autosound system does not have low-level line out jacks but has
only speaker outputs, connect your autosound system's speaker outputs to
the amplifier's HIGH INPUT jacks.
If your autosound system has four speaker outputs, see "Connection
Diagrams," Faxback Doc. # 44470 to connect your system's speaker outputs to
the amplifier using either a floating or common ground connection.
If your autosound system has two speaker outputs, see "Connection
Diagrams," Faxback Doc. # 44470 to connect your system's speaker outputs to
the amplifier using either a floating or common ground connection.
Note:
A floating ground connection lets the amplifier provide more power
to each speaker, but requires that you connect a separate wire to
each speaker terminal.
fewer wires to connect the speakers to the amplifier, but reduces
the amount of power supplied to the speakers from the amplifier.
Connections
A common ground connection lets you use
Faxback Doc. # 44451
Advertisement
Table of Contents
