Two Phono Output Jacks/Four Speakers - Optimus Owner's Manual

12-2010.fm Page 13 Tuesday, July 13, 1999 2:10 PM

Two Phono Output Jacks/Four Speakers

Note: For the best results, use two shielded phono plugs-to-phono jack Y-adapter
audio cables such as Cat. No. 42-2435 (not supplied).
1. Connect one of the cable's Y-plug ends to the amplifier's
nect the other Y-plug end to the amplifier's
2. Connect the other end of the cable to the system's left phono output plug.
3. Connect one of the cable's Y-plug ends to the amplifier's
nect the other Y-plug end to the amplifier's
4. Connect the other end of the cable to the system's right phono output plug.
(illustration)
jack.
CH3
jack.
CH4
jack. Then con-
CH1
jack. Then con-
CH2
13