Optimus Owner's Manual page 22

12-2010.fm Page 22 Tuesday, July 13, 1999 2:10 PM
Caution: This connection produces 250 watts per channel. Use this connection only
if you have high quality speakers capable of handling a power output of 250 watts.
1. Connect one end of a speaker wire's marked conductor to the amplifier's
terminal.
BRIDGED + CH1
2. Connect the other end of the wire to the left speaker's positive (+) terminal.
3. Connect one end of the speaker wire's unmarked conductor to the amplifier's
terminal.
BRIDGED CH2 +
4. Connect the other end of the wire to the left speaker's negative (–) terminal.
5. Connect one end of a speaker wire's marked conductor to the amplifier's
BRIDGED + CH3 terminal.
6. Connect the other end of the wire to the right speaker's positive (+) terminal.
7. Connect one end of the speaker wire's unmarked conductor to the amplifier's
terminal.
BRIDGED CH4 +
8. Connect the other end of the wire to the right speaker's negative (–) terminal.
9. Set
CH1/CH2 ST/BRG
22
and to
CH3/CH4 ST/BRG
.
BRG