Shift Cable Inspection And Adjustment (Deluxe Model Only) - Yamaha VX110 Sport Service Manual

INSP
ADJ
1
2
CONTROL SYSTEM
3
e. Install the handlebar cover.
Lower handlebar cover screw:
3.7 N • m (0.37 kgf • m, 2.7 ft • lb)
LOCTITE 242
Upper handlebar cover screw:
1.1 N • m (0.11 kgf • m, 0.8 ft • lb)
WARNING
After adjusting the free play, turn the han-
dlebar to the right and left and make sure
that the trolling speed does not increase.
Shift cable inspection and adjustment
(Deluxe model only)
1. Check:
• Reverse gate stopper lever position
Incorrect → Adjust.
Checking steps:
• Set the shift lever to the reverse position.
• Check that the reverse gate 1 contacts
the stopper 2.
2. Adjust:
• Shift cable joint
Adjustment steps:
• Loosen the locknut 1.
• Disconnect the cable joint 2 from the ball
joint 3.
• Situate the reverse gate to the stopper.
• Turn the cable joint in or out to align it
with the ball joint.
Turn in
Turn out
3-5
Length is decreased.
Length is increased.
E