Camshaft Inspection - Yamaha VX110 Sport Service Manual

POWR
3 6
5 4
3 9 8 6
5 7
10 4
CAMSHAFTS
7 10 1
9 8
2
13 17 16 12 1
2
11 15 18 14
5. Remove:
• Camshaft caps
• Dowel pins
NOTE:
Loosen the intake and exhaust camshaft cap
bolts in the sequence shown.
6. Remove:
• Intake camshaft 1
• Exhaust camshaft 2
NOTE:
To prevent the timing chain from falling into the
crankcase, fasten it with a wire 3.
7. Remove:
• Exhaust camshaft sprocket 1
• Intake camshaft sprocket 2
(with the special service tool 3)
Universal magneto and rotor
holder:
YU-01235
Rotor holder:
90890-01235

Camshaft inspection

1. Check:
• Camshaft lobes
Bluediscoloration/pitting/scratches
Replace the camshaft.
2. Measure:
• Camshaft lobe dimensions a and b
Out of specification → Replace the cam-
shaft.
Cam lobe dimensions:
Intake camshaft:
a 31.15 mm (1.226 in)
b 25.00 mm (0.984 in)
Exhaust camshaft:
a 30.75 mm (1.211 in)
b 25.00 mm (0.984 in)
5-47
E
→