HULL
HOOD
2
1
a
FRONT HOOD
SERVICE POINTS
Rivet Installation
1. Install:
• Rivets
Installing steps:
• Insert a rivet completely in the holes in
both the storage compartment panel 1
and inner hull.
• Push in the rivet pin 2 until it clicks and
is flush with the top of the rivet.
NOTE:
• To remove a rivet, push the rivet pin in
until it clicks and is below the top of the
rivet.
• Before reinstalling a rivet, hold the rivet
flange a with both hands and push the
rivet pin perpendicularly against a hard
flat surface until the pin protrudes from the
top of the rivet.
8-10
E