Connection - Platinum 7000 R3 Installation And User Manual

Installation

3.4 Connection

3.4.1 Preparatory work
5
3.4.2 Connect the AC voltage
DANGER
Risk of death due to high AC voltage!
f Switch off the mains voltage supply (AC side) before connecting the
inverter (safety).
f Make sure that the central isolation device can be accessed freely.
f Only connect the inverter to TN or TT networks (see IEC 60364-1) with
230 V.
f Observe max. fuse protection permitted on the AC voltage side of
32 A.
f Diehl Controls recommends a type C cable isolator switch.
12
1. Move the switch knob of the DC
isolator to position 0.
2. Loosen 6 screws on service cover.
3. To remove the service cover, push the
nose (5) forwards on the side of the
handle recess.
Installation and user guide PLATINUM Inverter 7000 R3, 9000 R3, 11000 R3, 14000 R3, 16000 R3