Table of Contents
Advertisement
9
Resetting Factory Defaults
To reset the factory defaults, remove the batteries and re-install them while holding down the
changes will default to the factory settings. This will require resetting the time and day. Refer to the Installer Options
Chart default settings to make any additional changes.
Hold down
SYSTEM
while replacing batteries
Although great care has been taken in preparation of this manual, Jackson Systems takes no responsibility
for errors or omissions contained herein. It is the responsibility of the installer to ensure that the Wireless
Zone One™ thermostat, control module and damper are installed and wired properly to provide safe and
efficient operation.
Due to ongoing product improvements, Jackson Systems reserves the right to change the specifications of the
Wireless Zone One™ system and its components without notice.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference and (2) this device must accept any interference received, including interference
key
All rights reserved.
©
Jackson Systems, LLC 2010
Intellectual rights apply.
8
5418 Elmwood Avenue, Indianapolis, IN 46203-6025
Toll Free: 888.652.9663 Fax: 317.227.1034
www.jacksonsystems.com
SYSTEM
key. All prior
06-1059-012611
Advertisement
Table of Contents
