Factory Schedule; Up And Down - Jackson Systems Wireless Comfort WCZ-600-T User Manual

Factory Schedule

This thermostat is shiped from the factory with the following programmable schedule.
Program
Morning
Day
Evening
Night
Warning!
The thermostat relies on battery power for communications with the WCZ-600 zone control
panel. Change the batteries every year or whenever the low battery warning is displayed.
Selecting System
Off, Auto, Heat, Cool or EM HT
Press the System key to select
or EM HT (emergency heating if your system is a heat pump).
In Auto , the thermostat will call for heating or cooling based on the heating and cooling set
temperatures and the indoor temperature. To view both the heating and cooling set
temperature in Auto mode, press the
along with the corresponding set temperature. Use the
Cool Set To
change the set temperature when the proper mode is displayed.
MENU
Selecting Fan
Auto or Cont
Press the Fan key to select
activates the fan during heating and cooling calls. In
circulate air.
MENU
2
Setpoint
Start Time
Heating Cooling
6:00AM 70F
8:00AM 62F
70F
5:00PM
10:00PM 62F
Off Auto , (heating and cooling)
NEXT key. The LCD will display
Heat
Set T o
Inside
HEAT
Mo
AUTO
AM
NEXT
HOLD ENTER
Auto or Cont (continuous) fan operation. In
Cont
Set T o
Inside
HEAT
Th
AUTO
AM
NEXT
HOLD ENTER
78F
82F
78F
82F
Heat (heating), Cool
Heat Set To and then
and keys to
UP DOWN
System
Mode
Auto the thermostat
the fan runs continuously to
Fan
Mode
(cooling)