Platinum 7000 R3 Installation And User Manual page 41

No. Meaning
Blocking errors
1000 Blocking system error
...
1030
1040 DC voltage too high
1050 DC connection has incorrect
polarity
1060 Blocking system error
...
1290
1300 L and N connections mixed up
1310 System error
...
1990
Non-blocking errors
2010 Amplitude limit for feed-in phase
exceeded or undershot
2020 Grid amplitude error phase-to-
... phase voltage
2040
2080 Network fault on feed-in phase
(voltage peak)
Installation and user guide PLATINUM® Inverter 7000 R3, 9000 R3, 11000 R3, 14000 R3, 16000 R3
Measure
▪ Isolate the inverter from the mains and
DC generator
▪ Put inverter back into operation
If measures prove unsuccessful:
▪ Inform service
▪ Check module connection
▪ Set DC isolator to 0
▪ Check DC connection
▪ Isolate the inverter from the mains and
DC generator
▪ Put inverter back into operation
If measures prove unsuccessful:
▪ Inform service
▪ Check L and N connection on AC plug
▪ Isolate the inverter from the mains and
DC generator
▪ Put inverter back into operation
If measures prove unsuccessful:
▪ Inform service
▪ Arrange for voltage amplitude of feed-
in phase to be checked
▪ Ensure that all safety devices are
switched on
▪ Ensure that all three phases are
connected
If this occurs frequently:
▪ Arrange for all contacts and safety
devices to be checked, from the
service connection to the inverter
▪ Arrange for the network quality to be
checked
Errors and troubleshooting
41