Adjusting Camera Angle For Baby Unit; Monitoring Mode - VTech BM3500 User Manual

Using your baby monitor

Adjusting camera angle for baby unit

You can rotate the camera head of the baby unit to view the
image from different angles.
To adjust the camera
• Press , ,
head of the baby unit upward, downward, leftward, or
rightward correspondingly.

Monitoring mode

You can choose to monitor in Single Baby unit, Split Baby
unit or Patrol Mode if there are more than one baby units in
your system.
To change the monitoring mode:
1. Press MENU/
2. Press or
/SELECT to select.
MENU
3. Press or
Patrol Mode.
• Single Baby unit - Press
unit. The parent unit only displays image of one baby unit.
You may change to view images from different baby units
by pressing
• Split Baby unit - The parent unit displays multiple baby
unit images in a maximum of four in one screen. If there
are more than four baby units in your system, images will
be shown on two split screens, which alternates with each
other automatically.
• Patrol Mode - The parent unit patrols to display images
from different baby units in every 7 seconds. You may
change to view images from different baby units even
though the scanning period is not expired by pressing
in this mode.
4. Press
MENU
Monitoring mode is not applicable when there is only one
baby unit.
angle:
or on the parent unit to rotate the camera
when the parent unit is not in use.
SELECT
to choose MONITORING MODE, then press
to choose Single Baby unit, Split Baby unit or
in this mode.
/SELECT to conirm your selection.
or to choose a desired baby
24