Table of Contents
Advertisement
Hearthstone Quality Home Heating Products, Inc.
Proflame Control System & Features
NOTE: OPEN DOOR UNDER THE ASH LIP AND DROP DOWN THE MODESTY PANEL FOR ACCESS TO
Bristol DX 8762 Model Overview
Proflame GTMFS System
The Proflame GTMFS is a modular remote control
system that directs the functions of the Bristol. The
Proflame GTMFS System is configured to control the
on/off, main/split burner operation, its flame levels,
and provides Manual and Smart thermostatic control
of the hearth appliance. The system controls two
remotely actuated 120V/60Hz power outlets. The Fan
outlet controls the fan speed through six levels, and
the Auxiliary outlet either on or off. There is also an
additional constantly powered 120V/60Hz outlet. The
system has battery backup power for burner
operation and control during power outages (see
page 9 for specifications).
Figure 1 - Proflame Remote Transmitter
Remote Transmitter
The Bristol comes equipped with a thermostatic
remote control transmitter. The easy to read LCD
display shows all functional abilities as well as a
childproof lockout and low battery indicator. It
displays room temperature readout, set temperature
readout and function status. The remote transmitter is
powered by three 1.5 volt AAA batteries. A Mode Key
is provided to index between the features and a
Thermostat Key is used to turn on/off or index
through thermostat functions.
ELECTRICAL AND GAS CONNECTIONS.
Receiver
The Receiver accepts commands via radio frequency
from the Remote to operate the appliance. The
Receiver is powered (6V DC) by the Fan Control
Module and uses four 1.5 volt AA type batteries for
backup during power outages. The Receiver's slider
switch is set to one of three positions: ON (Manual
Override), REMOTE (Remote Control) or OFF. The
ON selection turns the valve on (to high), and
activates the split flow setting last used if the Remote
becomes inoperative.
Fan Control Module
The Fan Control Module (FCM) is the main power
supply for the entire system when 120v AC is
available. The FCM provides two 120V remotely
controlled outlets, and one constantly powered outlet.
The FCM allows the remote to control the fan unit
through 6 speeds and turns the auxiliary outlet on
and off. This module also powers the Receiver and
Ignition Module with 6v DC, making the batteries in
the Receiver a backup power. When 120V power is
8
Figure 2 – Proflame Receiver
Figure 3 – Proflame Fan Control Module
Bristol DX Model 8762
Advertisement
Table of Contents
