Operating Determinations - Omnitronic KB-208A User Manual

Active speaker-systems
Hide thumbs Also See for KB-208A:
Table of Contents

Advertisement

Available languages

Available languages

CAUTION : Turn the speaker-system on last and off first !
Keep away children and amateurs!
By operating amplifying systems, you can produce excessive sound pressure levels that may
lead to permanent hearing loss.
There are no serviceable parts inside the speaker-system. Maintenance and service operations are only to
be carried out by authorized dealers.

OPERATING DETERMINATIONS

This speaker-system is an active system which can be used for permanent installations or for mobile use.
This product is allowed to be operated with an alternating current of 115/230 V, 50/60 Hz and was designed
for indoor use only.
The given maximum power of the speaker-system describes short-term peaks the system can handle as a
maximum. The correspondent RMS power is – as of all comparable systems (also from other manufacturers)
– significantly lower. The maximum power of the speaker-system must never be exceeded. When operating
the speaker-system, please make sure that the loudspeakers always sound well. When distortions can be
heard, either the amplifier or the loudspeaker is overloaded. Overloads can quickly lead to amplifier or
speaker damage. In order to avoid damage, please reduce the volume immediately when distortions can be
heard. When speaker-systems are destroyed by overload, the guarantee becomes void.
By operating speaker-systems with an amplifier, you can produce excessive sound pressure levels that may
lead to permanent hearing loss. Please refer to the explanations under „Legal instructions".
Speaker-systems must only be operated by instructed persons.
Danger of Life due to crashing speaker-systems or hearing loss due to excessive sound pressure
levels! The different local conditions have to be considered in terms of safety rules.
This speaker-system must never be operated or stockpiled in surroundings where splash water, rain,
moisture or fog may harm the speaker-system. When using smoke machines, make sure that the speaker-
system is never exposed to the direct smoke jet and is installed in a distance of 0.5 meters between smoke
machine and speaker-system.
The ambient temperature must always be between –5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
This device must only be operated in an altitude between –20 and 2000 m over NN.
This speaker-system must only be installed at a solid, plane, anti-slip, vibration-free, oscillation-free and fire-
resistant location.
Please note: when using this speaker-system in public or industrial areas, a series of safety instructions
have to be followed that this manual can only give in part. The operator must therefore inform himself on the
current safety instructions and consider them.
Before installing the system, make sure that the installation area can hold a minimum point load of 5 times
the system's load (e.g. weight 20 kg – point load 100 kg).
The speaker-system must never be installed higher than 100 cm without secondary attachment.
HEALTH HAZARD!
WARNING!
21/33
11038692_V_1_1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kb-210aKb-212aKb-215a

Table of Contents