Table of Contents
Advertisement
SC113 Chassis Manual
6-4
Rack Mounting Instructions
This section provides information on installing the SC113 chassis into a rack unit with
the rails provided. There are a variety of rack units on the market, which may mean
the assembly procedure will differ slightly. You should also refer to the installation
instructions that came with the rack unit you are using.
NOTE: This rail will fit a rack between 26" and 33.5" deep.
Identifying the Sections of the Rack Rails
The chassis package includes two rack rail assemblies in the rack mounting kit.
Each assembly consists of two sections: an inner fixed chassis rail that secures
directly to the server chassis and an outer fixed rack rail that secures directly to
the rack itself.
Inner Front Rails
(pre-installed on the chassis)
Warning: Do not pick up the server by the front handles. They are designed
to pull the system from a rack only.
Figure 6-1. Identifying the Inner Front Rails
6-4
Advertisement
Table of Contents
