Table of Contents
Advertisement
4-3
Control Panel LEDs
The control panel located on the front of the SC113 chassis has five LEDs. They pro-
vide critical information related to different parts of the system. This section explains
what each LED indicates when illuminated and any action that may be required.
•
Information LED: Alerts operator of several states, as noted in the table below.
Status
Continuously on and red
Blinking red (1Hz)
Blinking red (0.25Hz)
Solid blue
Blinking blue
•
NIC2: Indicates network activity on GLAN2 when flashing.
•
NIC1: Indicates network activity on GLAN1 when flashing.
Informational LED
An overheat condition has occured.
(This may be caused by cable congestion.)
Fan failure, check for an inoperative fan.
Power failure, check for a non-operational power supply.
Local UID has been activated. Use this function to locate
the server in a rack mount environment.
Remote UID is on. Use this function to identify the
server from a remote location.
4-3
Chapter 4 System Interface
Description
Advertisement
Table of Contents
