Removing The Backplane - Supero SC113TQ-R700CB User Manual

SC113 Chassis Manual
5-6

Removing the Backplane

The SC113 chassis backplane is located behind the hard drives and in front of the
front system fans. In order to change the jumper settings on the backplane, it may
be necessary to remove the backplane from the chassis.
Removing the Backplane from the Chassis
1. Power down the system as described in Section 5-2 and remover the cover..
2. Disconnect the cabling to the backplane.
3. Remove the five upper screws at the top of the backplane, indicated by the
arrows below.
4. Lift the backplane up and out of the chassis.
1
4
Figure 5-5. Removing the Backplane
5-6
Removing the Screws
1
3