Description Of Input Terminals - Fujitsu Plasmavision P42VHA10E User Manual

0+A RGB3 input terminal (RGB3 INPUT/BNC)
Connect this terminal to the PC's display (analog RGB) output terminal or decoder (digital broadcast tuner,etc.) output terminal.
*When RGB3 input terminal is connected, Comp.video mode is not available. (See P. E-36.)
A Component video input terminal (VIDEO4 INPUT)
Connect this terminal to the component video output (colour difference output) terminal of your HDTV unit or DVD player.
*When Comp.video input terminal is connected, RGB3 mode is not available. (See P. E-36.)
B RGB3 synchronization switch (SYNC SW TTL/ANALOG (75 Ω))
This switch is used to terminate horizontal (H) terminal and vertical (V) terminal, out of RGB3 input terminals, with 75 Ω.
TTL
ANALOG (75 Ω):
C Video1 input terminal (VIDEO1 INPUT/P-TE1000E)
Connect this terminal to the SCART terminal of your VCR or DVD, etc.
*See "SETTING THE INPUT TERMINALS" on E-35.
D S-Video input terminal (VIDEO2 INPUT/P-TE1010E)
Connect this terminal to the S-video output terminal of your VCR.
E Video input terminal (VIDEO1 INPUT/P-TE1010E)
Connect this terminal to the video output terminal of your VCR.
F Component video input terminal (VIDEO3 INPUT/P-TE1010E)
Connect this terminal to the component video output (colour difference output) terminal of your HDTV unit or DVD player.

Description of Input Terminals

DVI-D terminal (RGB1 INPUT/DVI-D)
RGB2 input terminal (RGB2 INPUT/mD-sub)
SCART terminal
20 16 12 8
18 14 10
21 17 13 9
19 15 11 7
RS-232C terminal (RS-232C)
: Does not terminate.
Terminates.
Pin No.
1
2
3
4
5
6
7
8
Pin No. Input Signal
4
1
6 2
2
3
4
5
6
7
5 1
3
Pin No.
1
2
3
4
5
6
7
8
9
Input signal Pin No.
Red 9
Green 10
Blue 11
— 12
Ground 13
Ground 14
Ground 15
Ground Frame
Pin No. Input Signal
— 8 —
Right audio 9 Green ground
— 10 —
Audio ground 11 Green
Blue ground 12 —
Left audio 13 Red ground
Blue 14 —
Signal
DCD (Data Carrier Detect)
RD (Received Data)
TD (Transmit Data)
DTR (Data Terminal ready)
GND (Ground)
DSR (Data Set Ready)
RTS (Request To send)
CTS (Clear To Send)
RI (Ring Indication)
Input signal
—
Ground
—
—
Horizontal synchronization
Vertical synchronization
—
Ground
Pin No. Input Signal
15 Red/chrominance
16 —
17 —
18 Composite video ground
19 —
20 Composite video/Y
21 Ground
E-9