Setting The Input Terminals - Fujitsu Plasmavision P42HHS10W User Manual

42” wide plasma display
Table of Contents

Advertisement

• Selection of indications
You can change the settings for indications for video inputs and RGB inputs.
Video input
You can change the settings for indications for the VIDEO1 – 6 inputs.
Select the desired indication in accordance with the connected equipment.
Each time
is pressed, the setting is switched. (In the case of VIDEO1)
Press
to store.
RGB input
You can change the settings for indications for the RGB 1 – 3 inputs.
Select the desired indication in accordance with the connected equipment.
Each time
is pressed, the setting is switched. (In the case of RGB 1)
Press
to store.

SETTING THE INPUT TERMINALS

Settings can be made for the video input terminals. Press
that you want to set. Then press
• Video input
Select the video input format.
Each time
is pressed, the setting is switched.
Auto:
The terminal to which the signal is input is automatically recognized.
Other than Auto: Select the desired input.
Press
to store.
* When Auto is selected, and multiple inputs are present, the inputs will have priority in the order of
Component Video, S-video, and Video.
* Component video input is not made to Video 3.
• Selecting Video Mode (Video Input)
You can use this option to select the desired video mode of pictures it will receive to the Video Input terminal.
Each time you press
or
, one of the available modes appears in the following sequence:
Auto1:
Automatically selects NTSC, PAL and SECAM.
Auto2:
Automatically selects NTSC and M-PAL.
Other than Auto: You need to select a system appropriate to the input signal.
Press
to store.
• DVI Input
You can select the signal method input to the DVI input terminal.
Each time
or
is pressed, the setting is changed.
DVI1
DVI2
DVI1:
Used when connecting to a PC.
DVI2:
Used when connecting to a DVD player or digital tuner.
Press
to store.
* Set according to the signal method before connecting peripheral device.
* On-screen information disappears if you do not take any action for about 60 seconds.
.
and select which of the video terminals VIDEO1 – 4
E-41

Advertisement

Table of Contents
loading

Table of Contents