Fujitsu Plasmavision P42VHA10E User Manual page 15

VCR
• Connect the video signal cable to the SCART terminal. (When the P-TE1000E is installed.)
• Connect the video signal to either the S-video input terminal or the video input terminal. (When the P-TE1010E is installed.)
To video output
To S-video output
To audio output
Note
• Unplug the power cord from the AC outlet before you connect external components.
• Also refer to the instructions for the component to be connected.
• When inputting audio, connect to the terminals corresponding to the used video input or RGB input.
To SCART output
An example of the underside of the display
(with the P-TE1000E installed in the P42VHA10)
To audio input To S-video input
An example of the underside of the display
(with the P-TE1010E installed in the P42VHA10)
To SCART input
To video input
E-15