Activate/Deactivate Eco Operating Mode; Selecting The Input Signal - Fujitsu P24-9 TE Operating Manual

Operation

Activate/deactivate ECO operating mode

The power consumption of the device can be decreased by reducing
the brightness of the picture.
► Press the

The message ECO Mode on or ECO Mode off is displayed.
If ECO mode is active, a brightness is used that is the optimum from both
the ergonomic and ecological aspects.
If the brightness is further reduced by the user, this new setting is used during
the next call of the ECO operating mode.
After the ECO operating mode is switched off, the brightness previously set by the user is restored.

Selecting the input signal

In the following cases an automatic change of the input signal is disabled:
• When the "Daisy-Chain" function is activated.
• When the input signal to the "USB-C" monitor port is chosen.
Press the
is not displaying an image and is in sleep mode
28
button to switch ECO operating mode on or off.
INPUT
VGA
HDMI
DisplayPort
USB-C
► Press the
► Press the /
► Press the
the window without making any changes.
button to call up the INPUT settings window if the monitor
button to open the INPUT setting window.
button to select the desired monitor port.
button to confirm the selected monitor port or to close
Fujitsu