Fujitsu Plasmavision P42VHA10E User Manual page 27

• Setting Noise Reduction (Noise Reduction)
Can select the noise reduction setting corresponding to the noise level of the input signal.
Each time you press or ,one of the available choices appears in the following sequence:
Off: Noise reduction does not function.
Min.: Weak setting
Std.: Standard setting
Max.: Strong setting
Press to store.
* Some type of signal can not be selected.
• Storing the setting of PICTURE (Picture Memory)
Stores 8 patterns of adjustments set by PICTURE.
Read out and store to suit your taste.
In case of "Load"
When setting "Load": Read out your desired Setting.
(1) Select "Picture Memory" and press
The "Picture Memory" screen will appear.
(2) Press or to select Load.
(3) Select Data number to make Load.
(4) Press to read out.
In case of "Save"
When setting "Save": Set to suit your taste and store.
(1) Select "Picture Memory" and press
The "Picture Memory" screen will appear.
(2) Press or to select Save.
(3) Select Data number to make Save.
(4) Press to save.
* On-screen information disappears if you do not take any action for about 60 seconds.
.
.
"Picture Memory" selection screen
"Load" selection screen
E-27