Fujitsu Plasmavision P42VHA10E User Manual page 33

• FEATURES setup screen has the following 5 options.
Adjustment : Can make a fine adjustment of pictures such as Dot Clock, Clamp Position.
Function : Allows setting of 24-frame mode. (See P. E-34.)
On Screen Menu : Can make a display setting such as OSD, Language. (See P. E-34.)
Input Terminal : Can make an input terminal setting such as Video Input. (See P. E-35 – E-37.)
Others : Can make other settings. (See P. E-38 – E-40.)
ADJUSTMENT
Dot Clock, Clock Phase, Clamp Position, and Auto Calibration are adjusted as shown in the following chart.
Select the item with , and then adjust with
Adjustment Item
Dot Clock You may find that pictures blur, depending on the
(RGB2, RGB3) clock frequency of your PC's processor.
If you experience blurring, you can obtain a clearer
picture by adjusting the "Dot Clock".
Clock Phase Pictures may blur as the clock phase of your PC
(RGB2, RGB3) may be different. In this case, adjust the clock
phase manually. Normally, the automatic setting
ensures the optimal value.
Clamp Position Adjusts the clamp position in accordance with the
(RGB2, RGB3, input signal received from connected equipment.
Comp. video) Normally, the automatic setting ensures the optimal
value.
Auto Calibration Adjusts the dynamic range of images to the
(RGB2, RGB3) optimum. Performed while a white screen signal is
received.
* On-screen information disappears if you do not take any action for about 60 seconds.
. Finally, press
Contents of Adjustments
to implement the adjustments.
Operation
Use to select the optimal value
at which blurring of pictures is
eliminated.
Use to select the optimal value
at which blurring of pictures is
eliminated.
Use to select the optimal value.
Display the Auto Calibration screen
and select Execute, and then use
to select the item.
Adjustment Range/Remarks
–60 to +60
Auto/Manual
Manual: 1 to 32
–8 to +8
Execute/Cancel
E-33