Activate/Deactivate Eco Operating Mode; Selecting The Input Signal - Fujitsu B27-9 TE QHD Operating Manual

Operation

Activate/deactivate ECO operating mode

The power consumption of the device can be decreased by reducing
the brightness of the picture.
The ECO mode can only be activated when the ACR and Auto Brightness are switched off.
► Press the
The message ECO Mode on or ECO Mode off is displayed.
If ECO mode is active, a brightness is used that is the optimum from both
the ergonomic and ecological aspects.
If the brightness is further reduced by the user, this new setting is used during
the next call of the ECO operating mode.
After the ECO operating mode is switched off, the brightness previously set by the user is restored.

Selecting the input signal

28
button to switch ECO operating mode on or off.
INPUT
DVI-D
HDMI
DisplayPort
► Press the
► Press the /
► Press the
the window without making any changes.
button to open the INPUT setting window.
button to select the desired monitor port.
button to confirm the selected monitor port or to close
Fujitsu