Placing A Call - Escene SayHi ES620 User Manual

Placing a Call

Here are some easy ways to place a call on SayHi ES620 IP Phone: :
If you want to...
Place a call using the
handset
Place a call using a
Speakerphone
Place a call using a
headset
Redial
Dial from the
Directory on your
phone
Place a call while
Another call is active
Tips
• You can dial on-hook, without a dial tone (pre-dial). To pre-dial, enter a number, and then go
off-hook by lifting the handset or pressing
• If you make a mistake while dialing, press C button to erase digits.
Escene Communication
Pick up the handset;
Press Speaker button;
or Programmable buttons;
or ;
Press Headset button.
--Press REDIAL button to dial the last number
-or press Navigation button-Right > "Dialed number", select a
number, and press
--1) Press MENU or OK button
"Missed calls", "Received calls" and "Dialed numbers",
- or press Navigation button (in Standby interface) > select "Missed
calls" (down), "Received calls" (left) and "Dialed numbers"
(right) )；
--2) Then press OK button or
--1) Press Hold button or
--2) Enter a number;
--3) Press „#' button (default) ;
-or press to send the number.
Then...
--1）Hear the dial tone；
--2）The first line light and display
；
--3）Enter number；
--4）Press "#" button(default);
or press
or wait five seconds(default)
Then send the call;
or OK button.
"Call history", you can select
>
.
;
, Headset or Speaker button.
ES620 IPPhone
;
www.escene.hk