Reload Global Timer Events - SOYO SY-6ICA User Manual

Pentium iii & pentium ii processor supported fw82820 agp/pci motherboard 100/133 mhz front side bus supported atx form factor
Hide thumbs Also See for SY-6ICA:
Table of Contents

Advertisement

BIOS Setup Utility
Power Management Controls (Continued)
Power
Management
Controls
HDD Power
Down
USB KB
Wake-UP
From S3
CPU Thermal-
Throttling

3-6.2 Reload Global Timer Events

Power Down
& Resume
Events
IDE0, IDE1
Ø Primary
Ø
Secondary
FDD, COM,
LPT Port
PCI PIRQ [A-
D]#
Setting
Description
Disabled
1-15Min When the set time has
elapsed, BIOS sends a
command to the HDD to
power down. This turns off
the HDD motor.
Disabled
In order to allow the system
to wake up from the S3
Enabled
suspend state through a USB
keyboard, set this item to
enabled.
87.5%
This item sets the proportion
of the original clock
75.0%
frequency to which the CPU
62.5%
will slow do in suspend
50.0%
mode.
37.5%
25.0%
Setting
Description
Disabled
Enabled
Enables the PM timers when [No
Activity Event] is detected.
Disabled
Enabled
Enables the PM timers when [No
Activity Event] is detected.
Disabled
Enabled
The system monitors these
elements for activity. The system
will resume if [IRQ activity] is
detected.
74
SY-6ICA
Note
Default
Some older model
HDDs may not
support this
advanced function.
Default
Default
Note
Default
Default
Default

Advertisement

Table of Contents
loading

Table of Contents