Unpacking The Motherboard - SOYO SY-6ICA User Manual

Pentium iii & pentium ii processor supported fw82820 agp/pci motherboard 100/133 mhz front side bus supported atx form factor

Hide thumbs Also See for SY-6ICA:

Table of Contents

Hardware Installation

2-2

UNPACKING THE MOTHERBOARD

When unpacking the Motherboard, check for the following items:

u The SY-6ICA FW82820 AGP/PCI/AMR Motherboard

u This Quick Start Guide

u The Installation CD-ROM

u SOYO 3-in-1 Bonus Pack CD-ROM (Norton AntiVirus,

Ghost and Virtual Drive)

u The Foldable URM (Universal Retention Mechanism) Set

(Factory installed on this motherboard)

u One IDE Device ATA 66 Flat Cable

u One Floppy Disk Drive Flat Cable

Warning: Do not unpack the Motherboard from its anti-static

packaging until you are ready to install it.

Like most electronic equipment, your Motherboard may be damaged by

electrostatic discharge. To avoid permanent damage to components ground

yourself while working by using a grounding strap. Otherwise, ground

yourself frequently by touching the unpainted portion of the computer

chassis to drain the static charges.

Handle the Motherboard carefully, holding it by the edges.

You are now ready to start the installation.

SY-6ICA

Table of Contents