SOYO SY-6ICA User Manual page 26

Pentium iii & pentium ii processor supported fw82820 agp/pci motherboard 100/133 mhz front side bus supported atx form factor

Hide thumbs Also See for SY-6ICA:

Table of Contents

Hardware Installation

After completely inserting the CPU, Now your CPU is ready for use.

To remove the CPU, press the two notches on top of the CPU inward.

Now press the two slides on the retention module down and remove

the CPU.

Note: Installing a heat sink and cooling fan on top of your CPU is

necessary for proper heat dissipation. Failing to install these items

may result in overheating and possible burn-out of your CPU.

2-3.1.1 CPU Fan Installation

Your Slot 1 processor kit comes with a cooling fan. Mount the fan on the

processor according to the instructions provided by the manufacturer. The

fan is a key component that will ensure system stability. The fan prevents

overheating, therefore prolonging the life of your CPU.

Note: Remember to connect the fan to the appropriate power source.

SY-6ICA

Table of Contents